1200 GSX Snow Flao

Sledder1200

New member
The snow flap on my 1200 gets under the track when I back it off the trailer, or back up in deep snow.
Was thinking of drilling a hole at the bottom center and using a short bungy cord to tie it up to the rear bumper.
Any other ideas?
 

phily

New member
I cut an old drive belt in half, looped it over the lift handle and screwed it to the flap with #10 screws to hold it in place.
 

eagle1

Well-known member
I thought they were made to bend outward and then back to normal? Maybe its just newer ones, not sure.
 

Go Fast or Go Home

Active member
I used some nylon webbing off a canvas duffel bag and put over the bumper and a small bolt to the flap.

When backing out of the trailer do not sit on the sled. Walk it out and it will not catch.

Don~
 

GTL

Member
Or you could just buy this one already done!!!!! You can see what I did on this to solve the problem. IMG_6672.jpg IMG_6674.jpg
 
Top