2001 zr rear suspension springs

nacho

New member
I was just wondering how many different springs are made for the rear suspension, and where I might be able to get them. I have a 99 zl that obviously has a stiffer spring on it. I would like to tighten up my zr a bit.
 

snowboss

New member
Nacho
I also have an 01 ZR and I put stiffer springs in it the day I brought it home. I weigh 400# so I needed the extra spring. I went to the dealer and found a sno pro spring with the correct spring angle that worked with the ZR skid. This is important for the spring to fit in the skid. The angle is measured off of the coil out the short side of the spring. It was not exactly the same but close. I noticed that it caused the rear of the sled to sit about a inch lower staticly but I never bottem out. I will look Monday to see if I have the part number some where.
Good Luck
Big Dave
 

nacho

New member
Thanks Dave, I took it over to my dealer yesterday for some other issues, and they said that there are 3 different ones you can put on there. They also said they can "wear out" after mileage and riding style-my sled has almost 10K on it. We'll see what they say about it. Thanks again.
 
Top