I have been chasing this demon for a few years now and after extensive internet searches I have been brought here because this is were most people seem to have experience with the Frontier.
It started with the rear hand warmers dying. Then we noticed that the head lights were dimer then our 488 trail touring, now we noticed the front hand warmers are touch and go and take a long time to heat up.
I get 14v at the battery when running and 9-10v at the headlight socket. We replaced the load shed with no change. Once in a while the lights will flicker bright but most of the time they are dim. I checked the voltage on the harness at the load shed.
Red is 14V
With load shed unplugged all the browns are at 12, with it plugged in they drop to the 10.
I can't figure out how to bypass they load shed by jumping the browns to ground. I tried just unplugging the load shed and jumping the sled ends to ground but nothing works, and I'm getting + readings (the browns do not appear to be ground)
Lastly
Could someone send me a wire diagram for this machine? We have the Polaris service manual for it that we bought brand new but there is no diagram in it. That section has a blank page. In my opinion its kind of vague and useless
It started with the rear hand warmers dying. Then we noticed that the head lights were dimer then our 488 trail touring, now we noticed the front hand warmers are touch and go and take a long time to heat up.
I get 14v at the battery when running and 9-10v at the headlight socket. We replaced the load shed with no change. Once in a while the lights will flicker bright but most of the time they are dim. I checked the voltage on the harness at the load shed.
Red is 14V
With load shed unplugged all the browns are at 12, with it plugged in they drop to the 10.
I can't figure out how to bypass they load shed by jumping the browns to ground. I tried just unplugging the load shed and jumping the sled ends to ground but nothing works, and I'm getting + readings (the browns do not appear to be ground)
Lastly
Could someone send me a wire diagram for this machine? We have the Polaris service manual for it that we bought brand new but there is no diagram in it. That section has a blank page. In my opinion its kind of vague and useless