2004 Frontier Classic- Load shed Module

E

edmarino

New member
I am having trouble with the load sheading module , I put a new one in and it appears to be doing the same thing as the old one ,so now I am thinking of just jumping around it. Is this possible without hurting the electrical system. If so what wires do I use,color code if possible. Of course the problem maybe something else completely, in the charging system.
Thanks for any help in this matter.
 
E

edmarino

New member
To Bobsledder
Sorry for not getting back to you sooner, I was away and did not have access to a computer. But the problem is the head lights go dim and then come back on, the duration of the brown out varies. Thanks for any helped.
 
B

bobsledder

New member
I had a similar issue and it was a bad connection in the dimmer switch in the left handle bar. There was crud in the contacts, I think I took it off the handle bar and used contact cleaner and air in the back side.
 
E

edmarino

New member
To Bobsledder
Thanks for the quick response ,I will look into the high low switch, which has been acting up by not switching between the two functions. I have a new switch to install, sprayed some WD 40 in and it seemed to help a little bit. So I did not change it yet.
 
You must log in or register to reply here.
Top