2013 800 PRO RMK Clutching

[staple66]

Bought a 13 Pro this past spring and no manual came with sled. Rode sled here at sea level and seems to do ok but that is just pulling hole shots in my yard. Wondering what people are running as far as clutching here verse out west. Heading out to Colorado in a couple of weeks.

Also wondering if people leave the sway bar hooked up on these sleds. Coming off a M8 and that didn't even come with one.

Thanks in advance

 

[polarisrider1]

Bought a 13 Pro this past spring and no manual came with sled. Rode sled here at sea level and seems to do ok but that is just pulling hole shots in my yard. Wondering what people are running as far as clutching here verse out west. Heading out to Colorado in a couple of weeks.

Also wondering if people leave the sway bar hooked up on these sleds. Coming off a M8 and that didn't even come with one.

Thanks in advance

68's here. 60's at 10,000 ft. Your local dealer can print out the specs for you. I can be more exact next weekend since my charts are up north.

 

[srt20]

I'm using stock springs. I use a little heavier than Polaris recommends for weights, but my engine makes more hp than stock. I am using Polaris 10 series weight. I think the stock stuff works very good in these sleds.

 

[staple66]

Thanks guys

Pulled apart and has what appears to be all stock springs and 10 66 weights.

Been searching and find all kinds of different opinions but nobody really gives stock settings.

 

[pez]

Thanks guys

Pulled apart and has what appears to be all stock springs and 10 66 weights.

Been searching and find all kinds of different opinions but nobody really gives stock settings.

I would call the dealer in the area that you will be riding.