2015 ski doo 600 etec start issues

[90s]

I guess there are problems with the new dess key, at time times the sled refuses to start. I don't know if this applies to the ace & 800 also. dealers should have the parts, mine is going in friday.

 

[momoney2123]

I guess there are problems with the new dess key, at time times the sled refuses to start. I don't know if this applies to the ace & 800 also. dealers should have the parts, mine is going in friday.

They are only having issues with people who installed heated shield plug in next to new RF keys. Basically any kind of accessory plug is causing interference with new keys. All dealers have plug in ferrite kits. Takes 5 minutes to fix. If you didnt install heated shield plug or GPS, u will be fine. If anyone has a problem on trail that hasn't updated yet, unplug ur accessory to get sled out of limp mode.

Also for 800etec a new cold start fuel map is out. Some 800etecs still in break in mode are fouling plugs as they went to a cooler running plug for the 15 800Es. Mine got both updates done in less than 10 mins at dealer. Took me longer to load the sled in trailer.

 

[Deleted member 10829]

The friend I rode with last Saturday had a 15 Doo that he was having all sorts of issues with the "key". He did install a GPS, so I will pass this on to him. Good info.

 

[mjkaliszak]

I picked up on the fouling plug issues. I went down to a " #7 " PFR7AB, unfortunately I have only rode 3.5 miles in a field so far.
Running an 800 E-tec X gade this year, looking forward to getting past the break in miles. Also set it up with a Ice Attack track & some Bergstrom TP's.