95 polaris got q's

mfire8

New member
I put a chain and a tenstioner on because he ran the chain case dry. I noticed there was an aluminum bracket that screws onto the chain case never thought about reasembled through it away went to try it goes forward but grinds into reverse. I narrowed it down to the chain is popping off of the sprocket. Question is how tight do i make the chain i thought it was finger tight half or quarter turn back. Or do i have another problem. Suggestions would be great.

Jeff
 

garageguy

Well-known member
That piece goes on the case on the back side of the chain, and keeps the chain from jumping over the spocket when going in reverse. It needs to go back in, or your chain will jump in reverse no matter how tight the chain is.
 

mfire8

New member
The piece was all bent up I think I threw it away I cant find it. Looks like i need to make one or find one can you get it sepratley from the case?
 
Top