A/C Power Valve Cables

[handiman]

I cleaned the power valves on my '06 600 Sabercat this weekend. I noticed one of the cables must be fraying inside the shroud because it was making a nasty noise and I could fell it rubbing. So I was going to pull the cable out from between the heads to get a replacement. It's a real snug fit and it hangs up when I try to get it out. I'm afraid if I get it out I won't be able to get the new one in. So my questions are:
Do I have to pull the heads to get these cables out?
If not, what is the procedure?
Any help would be appreciated, thanks!

 

[thebreeze]

You do not need to pull the head. They are tight, but they will go. There is a rubber piece that holds the cables together. Make sure that is removed. It seems impossible, but at the right angle, with some finesse they will go.