polaris_rider
New member
I have a 2009 600 IQ shift and was wondering if a canister for a 09 600 rmk will work. the rmk is cfi and my shift is not, will it work because the egt sensor is on the pipe. thanks guys
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Canister question
- Thread starter polaris_rider
- Start date
polaris_rider
New member
thanks i wasn't sure and didn't want to waste the money.
Also 1 more question what does a tunnel protector actually look like underneath? i am wanting to put studs in it and need to know if i need protectors. there is a square looking guide(2 of them) under the tunnel now, are those protectors? thanks alot guys
Also 1 more question what does a tunnel protector actually look like underneath? i am wanting to put studs in it and need to know if i need protectors. there is a square looking guide(2 of them) under the tunnel now, are those protectors? thanks alot guys
yes, they look like the hyfax. plastic sticks basically, attached to the tunnel, right over the clips on the track. That stops the studs from touching the tunnel (or cooler if there's one back there). The ones on my old Fusion slid onto the cooler just like hyfax, through windows behind the snowflap. Some have to be rivited on by taking the seat off, and go down the entire tunnel.
polaris_rider
New member
yep thats them! only they are metal not plastic. plus i couldn't find any in denniskirk or the other suppliers catalogs....thanks for the info guys!
Hm, if it's metal, it's not the tunnel protector... Its the cooler. They stretch down the length of the tunnel. That's how my 2009 RMK is, and I think all of them after they got rid of the Fusion.
The Polaris Dealers can get this for you. Here is a link to the PurePolaris site and the part you need:
http://www.purepolaris.com/Detail.aspx?ItemID=2877687(PolarisPGACatalog)
Looks like they are $100 from Polaris. I'm sure there are aftermarket ones out there...
The Polaris Dealers can get this for you. Here is a link to the PurePolaris site and the part you need:
http://www.purepolaris.com/Detail.aspx?ItemID=2877687(PolarisPGACatalog)
Looks like they are $100 from Polaris. I'm sure there are aftermarket ones out there...
The Polaris Dealers can get this for you. Here is a link to the PurePolaris site and the part you need:
http://www.purepolaris.com/Detail.aspx?ItemID=2877687(PolarisPGACatalog)
Looks like they are $100 from Polaris. I'm sure there are aftermarket ones out there...
For the tunnel protectors, I'd recommend the ones from Polaris, besides, I haven't seen any available from the aftermarket specifically for the late model Polais sleds.