Carbide wear

[Redneck_indy]

I have a 2015 polaris indy 600 international. I have noticed that the carbide only wears in one spot. It will wear all the way through towards the front of the carbide/ski and the rear end of the carbide will look brand new. My dad has almost the same sled with different skis and his don't wear like that. The skis on mine are the same as on the axys. Does anyone have an idea what i can do or adjust to make them wear more evenly?

 

[Wyelde]

Shims under the spindle. These will move the balance point further back on the ski. There is a good technical explanation of this on the Bergstromskegs.com site

 

[Deleted member 10829]

Shims under the spindle. These will move the balance point further back on the ski. There is a good technical explanation of this on the Bergstromskegs.com site

What he said. I put them on my 2015 Axys.

 

[xcsp]

Shims under the spindle. These will move the balance point further back on the ski. There is a good technical explanation of this on the Bergstromskegs.com site

Here: http://bergstromskegs.com/challenge.htm