Trying to help a friend here....any one know what could be causing the check engine light to flash steadily on a 2005 Fusion 900? When coming to a stop it shuts off and stays off once you go again until you reach a certain rpm and then it flashes steadily. (Sorry I dont know what rpm that happens at) He has looked at the code book, but of course nothing matching this is in there. Next step was to take to a dealer to check it out, but thought I'd ask around to see if anyone has had a similar issue.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Check Engine light on 2005 900 Fusion
- Thread starter megan600
- Start date
Thanks pippy...he was thinking the same thing as he did have to replace all the pistons earlier this season, but after pulling them they all look to be fine and it doesnt look like that is an issue anymore. Hes actually checked them after every ride to be sure, and the sensor is still going off.
vic_junior
Member
I had a similar issue with my fusion. Took it to the dealer and they replaced the air sensor in the airbox. The part cost around $80 at the time. This was in 2007. Problem fixed. I wouldn't have known this unless I took it in though. Goodluck!
Count the blinks they usually bilnk a code like blink then blink blink blink that would be 13 code not sure find that some of the dealers just want it in there if i take mine in i watch.80 bucks an hour it is good to be friends with the mec. then you get free info. Have you tryed asking snowest in 900 forum.