Clear code on Switchback 600ho

[wishbone]

Eng service code comes up on the display of our 2006 600 switchback when you start it up. How do you clear stored codes? Thanks

 

[raceinsnow]

Its not something that you can clear,its a engine problem that needs to be fixed. Do you know what coade it is?

 

[wishbone]

Not really a code I guess, it says eng service for about 5 seconds after startup and then everything is normal.

 

[mngolf4]

wishbone - see page 36 of the manual for your sled.

http://cdn.polarisindustries.com/polaris/common/parts-manuals/9920058r02.pdf

To reset the reminder at the existing interval:
1. Enter the service interval screen.
2. Press and hold the SET button for ten seconds, continuing to hold
even after the display begins to flash.
3. When the display stops flashing,
release the button. The service
interval has been reset.
To reset the reminder at a new interval:
1. Enter the service interval screen.
2. Press and hold the SET button for five seconds, until the hours
begin to flash.
3. Immediately release the button.
4. Press the button again up to five times to advance the reminder in
50-hour increments.
NOTE:
The maximum interval is 250 hours.
To disable the service interval reminder, press the SET button once
after reaching 250
hours on the display. The gauge will display
“OFF”.

 

[wishbone]

Thanks mngolf, second owner and don't have a manual.