How to grease the jackshaft on 2007 iq-600 cfi

[Iq-600]

Just wondering how to grease the jackshaft, there is no grease zert on polaris 2007 iq-600 cfi.
Any information would be great
Thanks

 

[mjkaliszak]

Well... on my 08 POO 600 iq , I have a sealed bearing there.

 

[accobra66]

Drove me nuts for a bit as well. Obviously use the same airbox as other sleds with a zerk. I purchased the shop manual for the sled as well (great investment by the way) and it is not listed there as a grease item. Sealed bearing, period.

 

[kraven700]

You have 2 choices,

1) Gently pry out the seal, and pack some grease, and re-install the "old seal"

2) Purchase the "old style" outer bearing flange (from an EDGE or other) and purchase the bearing with the "pin-hole" in the outer race.

POLARIS PART # 3514525

There's a "kit" out there sold by "ALL BALLS" (enough to do one shaft)
It includes 2 bearings (one radius-ed bearing for the secondary side,
and one "square edge bearing for the chain-case)
and a seal for the chain-case side

The newer 07 and newer IQ's do NOT have a grease-able secondary shaft bearing.

However, they do have a sticker on the side of the air box directing you to grease it every 1000 miles, lol