Polaris RUSH 600 Pro R - 2012

J

Jacob

New member
Did they change the amount of grease zerks on the the 2012 from the 2011? The manual is so poor when it comes to lubrication maintenance. I found all the bushing that I spray down with penetrating oil, but other than that I only see one grease zerk/point in the manual. Thanks!
 
D

dickmsp

New member
I Think You Broke Off All The Zerks On Those Poor Defenseless Green Trees On The North Shore!! Sorry Jacob, I Couldn't Resist!!
 
J

Jacob

New member
Last questions - any suggestions on carbide replacements? I went with the stock + 6" the last time but I'm open to better options. In addition, I put a good gouge in my one ski... is it worth buying the stock or C&A's or Powder Skis worth it?
 
D

D.B. Cooper

Member
Jacob said:
Last questions - any suggestions on carbide replacements? I went with the stock + 6" the last time but I'm open to better options. In addition, I put a good gouge in my one ski... is it worth buying the stock or C&A's or Powder Skis worth it?
Click to expand...

BERGSTROM SKEGS .com

Go to the website, Watch the video, buy the TRIPLE POINTS

listen to what Scott Bergstrom says about SHIMMING the skis, don't waste your money on aftermarket skis!

I just put them on my 2013 PRO-R 800 after riding with 6"

Would never use anything other than Triple Points!
 
R

rakins800

Member
kraven700 said:
BERGSTROM SKEGS .com

Go to the website, Watch the video, buy the TRIPLE POINTS

listen to what Scott Bergstrom says about SHIMMING the skis, don't waste your money on aftermarket skis!



I just put them on my 2013 PRO-R 800 after riding with 6"

Would never use anything other than Triple Points!
Click to expand...

X2
 
You must log in or register to reply here.
Top