skidoo 500

skidoo500s

New member
Hi i was wondering what the adjustment screw that pushes down on the throttle shaft does. If ur not sure where the throttle shaft is located well it is in between the two carbs and there is a braket holding a screw and that screw then pushes down onto the throttle shaft so i was wondering what that screw did.


Some possiable thoughts i got that it could be is the main idle for the two carbs.
 

longtrack

Member
Your Jet settings are on the side of the Carb, the Idle set is on the Top. Turn it and you will see what happens. We have to turn them up when we go out west every year.
 
Top