Tools to pull front skis off Polaris Fusion

[Hoosier]

My sled is in storage 150 miles from me. I had earlier pulled the skid out and am going to get the rear shocks rebuilt but after talking to the rebuilder I now decided to do the fronts as well. I talked my Dad into going over there and pulling them off for me (stored right by his house). Can someone tell me what tools he'll need to pull them off? I know he'll need something to put under the bumper to take the weight off but I can't remember how the shocks are fastened on. Just trying to make it simpler for him. Thanks.

EDIT: Subject should say front "SHOCKS" not "SKIS" (there only are front skis, right)?

 

[zimmbob]

No need to take the skis off just to take the shocks off. There are just two bolts. one at top and one at the bottom. Don't remember for sure, but probably 9/16 or 5/8. If he takes the tension off of the springs before removing them, that will help. turn the stop all the way to the top to loosen the spring.

 

[Hoosier]

No need to take the skis off just to take the shocks off. There are just two bolts. one at top and one at the bottom. Don't remember for sure, but probably 9/16 or 5/8. If he takes the tension off of the springs before removing them, that will help. turn the stop all the way to the top to loosen the spring.

Thanks zimmbob...yes, I meant shocks not skis!