What adhesive to use?

[pistons]

I need to reattach some brake lining material to a metal band that is used for a brake on a lawn tractor. It was not riveted and the lining is not thick enough to think about it. An epoxy probably would not work because it needs to flex a bit. Any ideas? Thanks

 

[HIGHLANDER]

 

[pistons]

If it looks,smells, and tastes like GLUE, it must be glue!

 

[yamahauler]

Go on 3M's website and look up adhesives. If you can't find it give them a call and they will tell you what's best and where to get it.

 

[sledder66]

You could try this and it should be available at any auto parts or eevn a farm n' fleet store - Loctite 59630 Superflex Red High Temp RTV, Silicone Adhesive Sealants

 

[polarisrider1]

I need to reattach some brake lining material to a metal band that is used for a brake on a lawn tractor. It was not riveted and the lining is not thick enough to think about it. An epoxy probably would not work because it needs to flex a bit. Any ideas? Thanks

Buy a new brake liner attached to the band.

 

[Stack]

Also check henkels website, I use a variety of loctite products in manufacturing with great results

 

[pistons]

Buy a new brake liner attached to the band.

The mower is a 28 year old Case. The line was sold to Ingersol Ran. And is no longer produced. The local dealer has no parts left.

 

[phazerpilot]

brakes... we don't need no stinkin brakes!!! 3m is your best place to look they have adhesives for everything, just a question of price you will spend . if your close to me im sure i have something that will work in my garage..

 

[Stack]

I have also heard that pliobond works very well, as it is a thermoset and will not weaken with the potenital high temps of a brake application (Even on a riding mower )

http://www.mcmaster.com/#=csc3jw