XP Renegde snow on the air intake
- Thread starter cobraindy
- Start date
polarisrider1
New member
You can get a fine snow filter for this. What yr. is the sled I may have one.
polarisrider1
New member
skiroule
Well-known member
I can't remember if the later Renegades come with the screen on the intake but if not, I highly recommend installing one. It was a real problem with both my older Summit and Renegade REVs until I put screen socks over the foam intakes.
I believe mine were made by SLP. I just pulled the foam out, slipped the sock over it, and put it back in. The snow and moisture doesn't penetrate the screen so it doesn't accumulate. I haven't had a problem since.
I believe mine were made by SLP. I just pulled the foam out, slipped the sock over it, and put it back in. The snow and moisture doesn't penetrate the screen so it doesn't accumulate. I haven't had a problem since.
polarisrider1
New member
I have for the 06 chassis. is that a rev?
polarisrider1
New member
I stock one in red and one in black. they are lightly used but like new.
skiroule
Well-known member
It is, but I don't know if the XPs were available before the new chassis. Cobraindy?
polarisrider1
New member
It amazes me on what sled stuff i have laying around. Cobrandy am I heading to the garage tonight to locate? sweet deal!
skiroule
Well-known member
If it doesn't have the socks, it's no problem to get them. The Summits come with them installed.
Happy snow snorkeling!!!
polarisrider1
New member
Don’t have those, I have the long narrow type for rev chassis. Sorry.
skiroule
Well-known member
Intake Kit for XP
Cobraindy,
Your XP most likely has screens but there is a kit made specifically for the XP to help eliminate the plugging by moving the intake.
It's available at http://www.shadetreepowersports.com. I've purchased from them many times and been very satisfied.
The product description is as follows:
"For Ski-Doo XP
This High Flow Intake kit for the Ski-Doo XP increases the air intake surface area by 33% to reduce the chance of the intake plugging in powder snow conditions.It is located higher than the stock intaake and within reach of the rider so that any snow that collects on it can be easily wiped away. The kit consists of a molded plastic adapter that seals between the stock air box and the hood along with an intake grate that utilizes pre-filter material that repels snow and waterwhile passing air through. This kit is a must for anyone riding powder snow conditions"
Cobraindy,
Your XP most likely has screens but there is a kit made specifically for the XP to help eliminate the plugging by moving the intake.
It's available at http://www.shadetreepowersports.com. I've purchased from them many times and been very satisfied.
The product description is as follows:
"For Ski-Doo XP
This High Flow Intake kit for the Ski-Doo XP increases the air intake surface area by 33% to reduce the chance of the intake plugging in powder snow conditions.It is located higher than the stock intaake and within reach of the rider so that any snow that collects on it can be easily wiped away. The kit consists of a molded plastic adapter that seals between the stock air box and the hood along with an intake grate that utilizes pre-filter material that repels snow and waterwhile passing air through. This kit is a must for anyone riding powder snow conditions"