08 m8 sticky recoil?

euphoric1

Well-known member
either grease in spring thick or grease on center post of recoil, remove clean all grease from spring, post, pulley and recoil housing lubricate spring with light coating of "Fluid-Film" I like this use it in my toys and shop, wonk cake when it gets cold, and as said just lightly coat spring, no need to use a ton of it.
 

mikedrh

Member
Working on one right now, same problem. The I.D. on the pulley (where it fits on the shaft) has too much clearance. That, combined with the extreme cold, puts it in a bind.
 
Top