Carb boot / rubber flange needed
- Thread starter lotoftoys
- Start date
skiroule
Well-known member
Very cool that you're still plugging away at the vintage iron over the summer. My progress has slowed over the summer but some things are still getting done.
According to the specs, this should fit but just to be safe, measure the bolt spacing on the intake (center-to-center). If it's 2 15/16" you're good to go. If not, there are other flanges that have different bolt spacings and the right one can usually be found once you know the spacing you need.
https://www.mfgsupply.com/snowmobile/snowcarb/snowcarbflanges/snowmikcarbflanges/07-469-1.html
According to the specs, this should fit but just to be safe, measure the bolt spacing on the intake (center-to-center). If it's 2 15/16" you're good to go. If not, there are other flanges that have different bolt spacings and the right one can usually be found once you know the spacing you need.
https://www.mfgsupply.com/snowmobile/snowcarb/snowcarbflanges/snowmikcarbflanges/07-469-1.html