Looking for the rubber flange between the carb and intake. Manual calls it a carb flange. 34vm mikuni going on a 1978 Ski Doo TNT 440 fan cooled. Text 815 -303-9009. Thanks
Very cool that you're still plugging away at the vintage iron over the summer. My progress has slowed over the summer but some things are still getting done.
According to the specs, this should fit but just to be safe, measure the bolt spacing on the intake (center-to-center). If it's 2 15/16" you're good to go. If not, there are other flanges that have different bolt spacings and the right one can usually be found once you know the spacing you need.