Suggestions?

coldbear

New member
What is a quality product to relieve the tension of trail stickers? I have a time with them with my wifes hair dryer.Thanks.
 

Firecatguy

New member
not sure what u mean here.......if your taking off stickers just pullem off when warm then use alcohol to rub the glue off
 

anonomoose

New member
Or you could just leave them on and paste the new one over the old one...then when you get stopped the guy sees you have multiple years (tiny strip of color shows below the current sticker) and understands that you take trail sticker purchases seriously.

I think I have about 12 one on top of the next.

Basically I am too lazy to pull them off, and this works fine.
 

mezz

Well-known member
No heat needed, just pull it off. The glue left behind can be removed with a soft rag with WD40 on it. Safe & won't leave any marks. Then all you have to do is wipe the area clean with some isopropyl or denatured alcohol to remove any residue, your now ready for the new decal.-Mezz
 

polarisrider1

New member
Do not use goof off. Goo gone works much better. Goof off will melt some plastics (headlight bezels) and other stickers you wish to save.
 

snow_monkey

New member
No heat needed, just pull it off. The glue left behind can be removed with a soft rag with WD40 on it. Safe & won't leave any marks. Then all you have to do is wipe the area clean with some isopropyl or denatured alcohol to remove any residue, your now ready for the new decal.-Mezz

X'2 use a dish type towel it is more abrassive and with d-40 will come off fast. Keep using a fresh part of the dishrag and a little elbow grease. Then the alcohol!
 
Top