2" or 3.5" Riser
- Thread starter jccams
- Start date
polarisrider1
New member
He could be correct with loosers. http://www.ross.net/notes/loose.shtml
I suspect Jack Nickolson played a looser in "One flew over the cuckoos nest". Nash, Good buddy, we need your help.
http://en.wikipedia.org/wiki/One_Flew_Over_the_Cuckoo's_Nest_(film)
I suspect Jack Nickolson played a looser in "One flew over the cuckoos nest". Nash, Good buddy, we need your help.
http://en.wikipedia.org/wiki/One_Flew_Over_the_Cuckoo's_Nest_(film)
Last edited:
polarisrider1
New member
4" riser at minimum. you can use same brake and throttle cables, you may have to reroute brake cable behind the oil tank, that can be done without disconnecting the brake line.
polarisrider1
New member
Indy, he is 5' 8" and still wants to ride trails comfortably. I did 4" on my 05 switchback and it was about right and I am 5' 10".
Did you put an extension on it or replace the whole cable?
indy_500
Well-known member
Im 5'9" and sitdown is very comfy.
Do you have the PASS seat? If not I'd go 3.5"
indy_500
Well-known member
I just bought 6" of brake line and a fitting, connected it to the existing brake line, and bent it around a large pipe.
alwaysright
New member
http://chuxlimited.com/unique.php
If you haven't checked this out, do it. Added one to my edge this year (I'm 5'10") and love it. it's only 3 but you can keep the bars at the same angle they are stock and it's a very nice 1 piece unit so you don't have to worry about anything slipping lose like some other kits.
I highly reccomend this.
If you haven't checked this out, do it. Added one to my edge this year (I'm 5'10") and love it. it's only 3 but you can keep the bars at the same angle they are stock and it's a very nice 1 piece unit so you don't have to worry about anything slipping lose like some other kits.
I highly reccomend this.
Using quotations in your message(s) …
</nbr></nbr></nbr></nbr>
<nbr><nbr><nbr><nbr><nbr><nbr><nbr> <nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr>
You might want to check this out: (click</nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr>→<nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr>) Using quotations in your message(s) …</nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr> In the Board Use Q&A forum.</nbr>
</nbr></nbr></nbr></nbr>
</nbr><nbr>
<nbr><nbr><nbr><nbr><nbr><nbr><nbr> <nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr>
You might want to check this out: (click</nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr>→<nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr><nbr>) Using quotations in your message(s) …</nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr></nbr> In the Board Use Q&A forum.</nbr>
Should have guessed you would come to my rescue. Felt pretty stupid after I screwed it up but apparently I cannot delete my posts. A preview feature would be nice so I can prevent myself from looking so stupid. If this doesn't work I'm really going to look dumb.
You want a preview? Check out the Preview button on the lower right corner of the screen:
