heckler56
Well-known member
I got that also on occasion. And we know my shield was not getting power. My Flow shield does allow infiltration as it has minor gaps in the wiper and big build up of snow on the shield mounts. These gaps are significantly larger on the original shield.
Based on my experience, run continuity tests on the back contacts. Acceptable range is 9-12, mine was at 11. Next run resistance between the two helmet shield contacts. Mine bounced around indicating the shield power was not functioning. The shield is easy to test the two screws or contact points…
Based on my experience, run continuity tests on the back contacts. Acceptable range is 9-12, mine was at 11. Next run resistance between the two helmet shield contacts. Mine bounced around indicating the shield power was not functioning. The shield is easy to test the two screws or contact points…