hermie
Well-known member
Yes it will. Installed on mine and my wife's helmet yesterday along with the chin curtain from the se oxygen helmet.
Oxygen vented shield?
- Thread starter euphoric1
- Start date
hermie
Well-known member
Well got our and put a few miles on with the flow shield. It was about 37 degrees out. I had the heat on 1 bar and the vent open. I was comfortable all day. A few things to keep in mind. We were riding railroad grades so not a whole lot of effort to ride. I also run a lower windshield.There are a couple of for me real pluses. #1 is I was able to leave the heat on one bar and no fogging at all which never happened on the old shield. My old shield always had what I would call a line in the shield that I would either need to look above or below not with this shield. Personally for me was well worth the purchase price and made a really good helmet that much better. Nice to know I can now wear it on the really cold days which is where this helmet really shines but also as it gets warm now. I use to wear my 509 helmet once it got a little warmer now I will stick to the oxygen. I feel with the vent open you might be able to ride unplugged but I like having the light on the helmet another really nice thing with this helmet. I feel they should all come with a light on them, they really help on those cold days where the snow dust is flying.
hermie
Well-known member
You are welcome let me know how you like it after you get some miles on with it.
will do, looking like heading up saturday
finally got to use the helmet when it was bitter cold outside -25 with wind, as stated above I purchased the vented shield, even with as cold as it was I still never went over the 2nd setting and was very comfortable, the vented shield lets just enough air in, when you breathe in you get some cool air which I like and the condensation I used to get is no more. I was able to ride with chin vent closed. All in all IMO the shield is a must and the answer to what to me was a heat trapped helmet.