pclark
Well-known member
This is more of an FYI if you do your own maintenance. On my 900 Ace you have remove the exhaust to replace the battery. Of course there are 4 springs holding the exhaust in place, easy enough to loosen the springs but if you’ve done this getting the springs back in place is a little trickier. I took an old screw driver and notched it on my grinding wheel, then took my hand grinder and deepened the notch so that the spring would stay in place better. Attached the spring to the exhaust then take the new tool and push the other end in place, easy and one and done. New battery installed, just praying for snow at this point.